How to Adjust the Baler Correctly?

 The daily inspection of the waste paper baler ensures that it can run normally, its stability during operation, and certain requirements for the operation of hydraulic components. The waste treatments baling machine manufacturer to shares with you:

The hydraulic control elements of the waste paper baler refer to various types of valves because they can flexibly control the activity direction, pressure and flow of the waste paper baler to satisfy the needs of the waste paper baler to perform, stop, The direction of movement, force or moment, speed or speed, the sequence of action and overcoming load so that it can show its instinct in the packaging system.

With more and more balers on the market, we must pay attention when buying. Otherwise, the effect will be greatly reduced when used, such as frequent cassettes, problems with the bonding effect, and so on. Having said that, the hydraulic automatic straw baler supplier will give you a simple analysis of the main reasons for the problem of bonding effect ~

The main points are as follows:

1. The temperature is too high or not enough, sometimes special tapes have poor viscosity, and the temperature must be very accurate;

2. The voltage used is not enough. There are many factory voltages, which are often insufficient. If you use extension cables or cables, it will cause a voltage drop, which will lower the originally adjusted temperature and even burn out when the motor is tightly bundled. Therefore, try to avoid using cables If you must use an extension cable, you must connect a thicker wire instead of a long one;

3. The electric heating steel sheet is too high or too low or left or right, so it can't enter the heating when it encounters the upper and lowers PP belts, or the left and right cutters.

4. The exhaust fan of the smoke fails, making the temperature too high.

Time is money. This sentence is very classic. In order to pursue high-quality and high-standard development, companies continue to be new in all aspects, surpassing competitors. For example, from the PP belt packer in the packaging industry, you can start from The points that reflect this.

Waste Paper Baler 

The market has been in short supply to oversupply. From the seller's market in the packaging industry to the buyer's market in the packaging industry, consumers have higher and higher requirements for consumer goods. With the development of the market and meeting the needs of consumers, the market demand for balers is still very broad. As long as the balers are constantly new and seize opportunities, I believe that the future of balers is bright.

Waste paper baler adopts good PLC control to make the running time accurate to 1 millisecond, and it can be adjusted on-site to ensure the speed of packing in special flow operations. It is more suitable for different quality packing machine accessories. The packing speed is fast and it only takes 2.2 seconds per lane. Free of oil, rugged and easy to operate. The elasticity can be adjusted at will, which can meet all kinds of tightly packed and never fall off. The strap is placed on the outside for easy belt changes.