2019年8月30日星期五

[Waste compression system]The disposal method of domestic refuse


Disposal methods of domestic waste:
Waste recycling equipment manufacturer shares that domestic waste treatment refers to the treatment of all kinds of waste discharged by residents (excluding municipal facilities and construction waste) in urban waste, including the processing process for transportation and recycling. The purpose of using domestic waste treatment equipment is to make the form and composition of waste more suitable for disposal requirements.
1. Landfill: landfill treatment needs to occupy a large amount of land. At the same time, the hazardous ingredients in garbage will cause serious pollution to the atmosphere, soil and water source, which not only damages the ecological environment, but also seriously endangers human health.
2. Compost: compost should be used to sort and classify waste, requiring high organic content of waste. And compost treatment can not be reduced, still need to occupy a lot of land.
3. Incineration: the essence of incineration is to oxidize organic waste into inert gaseous materials and inorganic incombustible materials at high temperature and under sufficient conditions of oxygen supply, so as to form stable solid residue. The waste is first burned in an incinerator, releasing heat energy, which is then recycled to provide heat or generate electricity. Flue gas purification after discharge, a small amount of residual residue, the use of household waste treatment equipment landfill or other USES. Its advantages are rapid capacity reduction and complete high temperature harmless, covers a small area, has little impact on the surrounding environment, and has heat energy recovery.
Waste recycling equipment manufacturer
4. Classified recycling: this is the best way to use waste, generally divided into three categories: first: non-recyclable, mainly including kitchen waste, leaves, dust, bricks and tiles; The second category: recyclables, including plastics, paper products, glass, metals and textiles, can be used as renewable resources. The third category: hazardous substances, including lamp tubes, paint buckets, pesticide buckets, waste batteries, etc., this kind of garbage will cause serious impact on the environment.
Recyclable garbage in life: a new life in the paper basket -- discarded newspapers, books, wrapping paper. One ton of waste paper can be recycled to produce 800 kg of good paper, 17 trees can be saved, 3 cubic meters of landfill space can be saved, less use of soda 240 kg, reduce paper pollution emissions 75%, save paper energy consumption 40% to 50%, and each paper can be recycled at least twice. Plastic bags, plastic bottles, disposable plastic dinnerware boxes. All waste plastic, waste food boxes, food bags, woven bags, flexible packaging boxes, etc. can be converted back into fuel oil by using the technology of reducing waste plastic to gasoline and diesel. What is broken can be restored -- glass bottles and pieces of glass. Recycling waste glass can not only save natural resources, but also reduce energy consumption by about 32%, reduce air pollution by 20% and water pollution by 50%. After being dissolved, waste cans can be recycled into new cans 100% of the time. Moreover, they can be made into parts of cars, airplanes and even furniture.
That's all for the sharing,and we supply waste compression system for sale, if you have any demand for our products,just feel free to contact us.

2019年8月25日星期日

What are the differences between direct combustion and catalytic combustion?


What are the differences between direct combustion and catalytic combustion
Waste recycling equipment manufacturer shares that the combustion method of domestic waste treatment equipment can be divided into two, namely direct combustion and catalytic oxidation combustion. Direct combustion method refers to when the combustion gas at the same time, through the oxidation thermal decomposition method, and the heat degradation will be harmful VOCs in the combustion chamber, the harmful VOCs gases after input into the combustion chamber, when the objective factors such as high temperature and enough air condition under the premise of perfect, the harmful gas fully burning completely, finally make it completely decomposed into CO2 and H2O. And direct combustion method is this kind of VOCs combustion burnable waste gas, the method in the treatment of high concentration VOCs gases, show that the effect is better, but the corresponding requirements for the control of the temperature is very high, must under the condition of high temperature, when the temperature in the vicinity of 1100 ℃, the removal efficiency can reach more than 95%, but if when the waste gas containing Cl, S, N elements, such as the direct combustion will produce the harmful gas such as HCl, SOx, NOx, cause secondary pollution.
Waste recycling equipment manufacturer
Catalytic combustion technology is a new technology developed in recent decades under the trend of environmental protection and energy conservation. Catalytic combustion method is to use different kinds of catalyst, using the principle of the can effectively reduce the reaction activation energy, make the VOCs in the case of low temperature, its completely oxidized to CO2 and H2O, generally when the temperature control in the range of 300 ℃ ~ 450 ℃, the vast majority of hydrocarbons can be in by oxidation, and the removal rate is as high as 95% above, but the catalyst has the certain service life, and life garbage disposal equipment in the process of the use of the catalyst, the exhaust gas catalytic oxidation effect of humidity and types of catalyst has a key effect, if other material in the waste gas, It is likely to cause the poisoning of the catalyst, so the high quality catalyst should have the characteristics of high activation capacity, high thermal stability and hydrothermal stability.
At present, Pd, Pt, Rh, Au, Mn, Co, Ce and Pd, Pt, Rh, Au are precious metals. However, precious metals are expensive and easy to sintering, so developing new composite catalysts is the future research direction.
That's all for the sharing,and we supply waste compression system for sale, if you have any demand for our products,just feel free to contact us.

2019年8月20日星期二

[Hydraulic baler machine supplier] Features of the Hydraulic waste compacting machine


All models are hydraulic drive, can choose manual or PLC automatic control operation;
(2) the material out of the form of turning over the package, push the package (side and forward) or manually take the package (packaging) and other different ways;
(3) installation without foot screws, in the no power supply place, can use diesel engine as power;
(4) extrusion pressure from 63 tons to 400 tons have ten grades, for the user to choose, production efficiency from 4 tons/shift to 40 tons/shift.
(5) compression chamber size and package size can be customized according to customer requirements.
That's all for the sharing,and we supply recycling sorting machine for sale, if you have any demand for our products,just feel free to contact us.

recycling sorting machine

2019年8月15日星期四

[Waste sorting system for sale]Trial operation of yunnan project


Trial operation of yunnan project
In the environmental protection industry, Qunfeng is a professional manufacturer of waste liquid compression equipment. The main products are vertical garbage compression equipment, mobile horizontal garbage compression equipment, buried garbage compression equipment, horizontal garbage compression equipmentand garbage classification system.
The following figure shows the waste sorting system of the landfill site in the pilot operation stage of yunnan project.
waste sorting system
garbage classification system

2019年8月9日星期五

Usage of hydraulic compress equipment


The purpose of hydraulic compress equipment shared by waste recycling equipment manufacturer.
Hydraulic press can squeeze all kinds of metal scrap (steel shavings, scrap steel, scrap aluminum, scrap copper, scrap stainless steel and scrap automobile waste, etc.) into cuboid, octagonal shape, cylinder and other qualified furnace charge, which can reduce the transportation and smelting cost and improve the rate of furnace feeding.
This series of baler is mainly used in steel mills, recycling and processing industries and non-ferrous metal smelting industries.
In the environmental industry, Qunfeng is a manufacturing company specialized in making waste hydraulic compress equipment. The main products are vertical waste compress equipment, mobile horizontal waste compress equipment, buried waste compress equipment, horizontal waste compress equipment and waste classification system. Thanks to its professional team in specialties such as machinery engineering, automatic control, hydraulic structure and manufacturing.

Municipal Solid Waste recycling system

2019年8月4日星期日

[Recycling sorting equipment supplier]Introduction of new products


Usage
Specialized in recycling and compressing the loose materials like waste paper, cardboards/cartons, PET bottles, magazines, plastic film and fabrics, straw etc.
Main
Features
* automatic compressing, strapping, wire cutting and bale ejecting. High efficiency and labor saving.
* Particular anti-slide design of the machine makes nicer bales
* Three sides convergent way, counter loop type, tightening and loosening through the oil cylinder automatically.
* It configures with PLC program, operated simply and equipped with automatic feeding detection, can compress bale automatically, realize unmanned operation.
* It designs as special automatic strapping device, quickly, simple frame, acting stably, low failure rate and easy to maintain.
* It has a function of automatic fault diagnosis, improving the efficiency of detection.
* Used our own hydraulic technology to save energy and protect environment.
* Adopt the vessel classification of welding process to ensure that equipment is more stable and reliable.
* Adopt the Schneider appliances.
* Adopt the Chinese local imported seals to ensure without phenomenon of oil leak and improve the service life of the cylinder.
* Block size and voltage can be customized according to customers' reasonable requirements. Bales weight depends on different materials.
* Adjustable bales length and bales quantity accumulating function make the operation of the machine more convenient
It equipped with the starting motor and the booster motor to save power, energy consumption and cost.
FDY 1250 D Full Automatic Baler (lengthen Type)

How does NIR Optical Sorting System Work?

NIR Optical Sorting   is one of the most rapidly developing high technologies in the last 20 years. This technique is convenient, fast, effi...