How Automatic Packers Extend Service Life?

 The automatic packer is a carton packer equipment that many large enterprises have begun to use now. The automatic packer has high efficiency, simple and convenient operation, and is easier to use. After using the automatic packer for a long time, it will definitely cause his wear and tear. How can we guarantee his long-term use?

First of all, we need to formulate the rules and regulations for the cleaning and maintenance of the baler, and record each time the baler is maintained.

The working surface of the automatic baler should be cleaned, and cleaned before or after use;

There are also wearing parts of automatic balers, such as blades, irons, etc., which also need to be cleaned.

The second is that according to the use of the automatic baler, it is necessary to preheat the hot head of the baler, so as to ensure that the baler can complete the baling work when it is working.

When using an automatic packer, the operator must always pay attention to the use of the packer. If there is an abnormal sound or a problem with the packer, we must turn off the power in time to prevent accidents.

Automatic Tie Baler Machine

When adjusting the hot head of the baler, do not adjust the temperature too high, as this will damage the baling of our baler.

After an automatic tie baler machine is used for a long time, our operators need to lubricate each part of the baler to ensure that each part can work normally.

When the workshop staff performs maintenance on the baler, it is necessary to record the failure of the machine every time to facilitate future inquiries.

When operating the packer, the workshop operators must pay attention not to penetrate their hands into the machine while the packer is working to prevent danger.

The operator must use compressed air to blow the dusty and tapered parts inside the machine before work every day; use a blade to scrape off the hot adhesive residue on the iron; clean up the dirt on the exhaust fan of the iron.

Regarding how we use the automatic packer, how to use it for a long time, we have rich experience. In fact, after we purchase the automatic packer, our good way is to formulate the safe operating procedures of the packer, so that we can be more effective. The use of automatic packers guarantees the long-term use of our 

Have You done All These Things for Epidemic Prevention?

 In 2020, in such an unusual way, the "home" will undoubtedly become everyone's daily life. With various reflections on the present, people's awareness of health is deepening, more and more attention is paid to the deep relationship between health and housing, and people are thinking about the importance of health. Outbreak protection measures are still very important at this time!

Environmental equipment manufacturer brings a full set of guidelines for epidemic prevention:

01 Inspection package before going out

Masks (2-3 pieces), protective glasses, disposable gloves, disinfection wipes, paper towels, disposable hand sanitizer, alcohol spray, be prepared, don't complain about too many things, and take precautions. Remember to wear a mask before going out, don't forget to put it in your bag!

Tips:

1. Taking disposable masks as an example, what is the correct way to wear a mask?

① The dark side is facing outward and the light side is facing in. The end with the metal strip is above the mask;

② Wash your hands first, then wear a mask, and hang the rope on your ears at both ends;

③ Use both hands to press the metal strips on both sides of the bridge of the nose so that the metal strips are close to the bridge of the nose;

④ Then stretch the mask downward to cover the nose and mouth completely and fit the face;

⑤ When taking off, avoid touching the front of the mask (contaminated), take off the rope at both ends, and fold the disease into the trash can.

2. When do I need to change my mask?

① The mask is broken or damaged;

② Can not fit closely to the face;

③ The mask has received pollution (if there are droplets or other pollutants);

④ When the mask has a strange smell.

3. Can I take an alcohol spray to the train?

Alcohol or 75% medical alcohol cannot be brought into the station. The disinfection items that can be stationed are: alcohol disinfection wipes / cotton pads / cotton balls and 84 disinfectants in a suitable package within 700 ml.

02 Transportation

When going out, it is recommended to choose walking, biking or taxiing as much as possible. Anyway, it is where fewer people go. There is no way to crowd people!

Different travel modes have important points that need to be protected.

Bike ride

Purpose: Remember to sterilize shared bicycles before they are placed in public places for a long time, and they are often used. Therefore, disinfect the handle with alcohol wipes or alcohol spray before unlocking!

2. Subway or bus

Purpose: Hide your hands, and try to keep the place where there is extremely dense crowds, the protection awareness must be online:

① Cooperate with body temperature measurement, keep the distance in line, wait for the next bus when full;

② After getting in the car, even if the car is stuffy, don't take off the mask;

③ Crowded people, back to back, choose a place to ventilate;

④Less touch the facilities in the car, less use mobile phones to cause bacteria;

⑤ Don't panic if you have a fever or cough! Keep a distance of 1-2 meters or more, depending on the situation, it is necessary to transfer in time;

⑥ Wipe or wash your hands with disinfectant wipes after getting out of the car.

3.Taxi or online booking

Purpose: Don't chat.

① When opening or closing the door, use a paper towel or gloves to open the door handle;

② Drive through the windows and ventilate, sit in the back row, avoid talking with the driver, and avoid the spread of saliva.

4. Take the elevator or escalator

Purpose: Do a good job of "isolation". Remember to wash your hands when going out of the station, entering the station, or arriving at the unit, you need to take the escalator or elevator. Here, it is recommended that everyone can take the stairs.

First, fewer people

Second, you can exercise! If the floor is too high, there is no way. So what do you need to pay attention to?

① Wrap the handrail with disposable gloves or paper towels when riding the escalator;

② When taking the elevator, even if you see "disinfected here", you need to wrap your fingers with a paper towel and press the elevator button, because the air in the elevator is extremely circulated;

③ Immediately after getting down the escalator or elevator, throw paper towels or gloves into the trash can and go to the bathroom to wash your hands for at least 20 seconds.

④ After washing your hands, try not to touch the door handles or facilities in public areas.

03 Arrive at the office

Purpose: Masks cannot be removed, try to be "cold" as much as possible

1. Must wear a mask and ventilate the office;

2. Go back to your seat and wipe your cell phone, headphones, etc. with alcohol;

3. When handing items or talking with colleagues, avoid putting shoulders too close together, keeping a distance of more than 1 meter, if you can chat online, you will not be interviewed;

4. Wash your hands and drink hot water. Keep a hand cream in your office;

5. For dining issues, it is recommended to bring your own boxed lunch. After all, takeaway is not so “reliable” in extreme times; if it is a takeaway, try to choose contactless takeout.

Tips: Contactless take-out means that the take-away brother will place the product in the designated location, reducing face-to-face contact and avoiding the risk of cross infection.

04 Home from work

Purpose: Comprehensive disinfection

1. Take off the mask, fold it, seal it with a plastic bag, and throw it into a trash can for waste masks;

2. Wrap up your shoes to minimize the risk of the virus going home with you;

3. Hang the jacket in a ventilated place (balcony) after entering the door. It is not recommended to use alcohol spray for disinfection. One is that it is easy to damage clothing, and the other is that alcohol is a flammable liquid.

4. Wipe personal belongings (mobile phone, headset, bag, etc.) with alcohol to fully disinfect;

5. After disinfection, it is best to take a bath ~

 

How to Use the Automatic Baler Correctly？

 How to use an automatic baler? In fact, is it true that we will use it? What should we do? This requires our company to train our employees. Why train employees?

First: Training is an effective investment for businesses. Now companies are gradually increasing their emotional investment in employees. Training can be one of the important methods of emotional investment and can help companies retain talent. Therefore, training in the company is an effective investment, which means that employees can learn more knowledge and skills.It's a consumption that works in the long run, and it means that companies are giving tomorrow's jobs. Why not do something that benefits both sides?

Second, training can regulate the workflow. A standardized workflow can avoid errors and dangers to a large extent. For example, if a worker who operates a machine does not train him to open the switch button first and then when he opens the machine, once he reverses the order or does not follow the process, the consequences may be machine damage and personnel injury, causing huge losses to the enterprise.Standard operation process training can improve the safety of production, reduce the risk of error.

Third, training can improve work efficiency. Training based on actual needs can improve the work efficiency of employees, and the same goes for machines.For example, br326 baler was not used before training, each operation button did not know what role, also do not know how to operate, adjust the size of the tension, the length of hot melt time, multiple points, and other problems, not tight will cause a lot of wear and tear to the machine, failure to reduce life, and so on, but also waste time, waste packaging materials.

Automatic Packing Machine 

Training can not only give the company's employees master a technology, but also can extend the life of the machine better for you to work, so that the work efficiency also improved the machine also extended the life, for the enterprise to improve the work efficiency of the staff is to save costs; For the employee herself, it may become her promotion capital, win-win things, everyone will be willing to do.

In fact, we must be formulated first before training about automatic packing machine and semi-automatic strapping machine safety operation procedures, we train employees to training in accordance with the operating rules, safety operation procedures of operation in order to we can always pay attention to safety in operation, ensure the security of our personal and corporate, attaches great importance to the safety in production now.

Work Flow of Hydraulic Packer

 Waste treatments baling machine manufacturer shares the workflow of hydraulic balers.

1. Check whether the appearance of the equipment is abnormal and whether there are hidden safety hazards around it. After confirming that it is normal, turn on the load switch of the electric control box, turn the key switch to the open position, turn on the emergency stop button, and the power indicator of the electric control box lights up.

2. Put a large piece of paper on the bottom of the machine, close the upper and lower iron doors, and turn the lower door fastener to lock it firmly (the door must be locked firmly when it is locked at the end, because the internal pressure is large when the machine is working, and the lock is not tight. A gap in the door will cause the safety protection sensor to operate, and the machine will stop protecting).

3. Press the row button to let the indenter press down to the bottom and automatically rise to the upper position to stop. Air pressure will reset the bag-out chain on the indenter once.

4. Open the upper iron door and put the material evenly into the machine until it is full, and close the upper iron door (be sure to close it in place, otherwise the safety photoelectric detection sensor on the door will act and the machine will not start).

5. Press the row button, the indenter goes down, and when it is pressed to the bottom, it automatically rises back to the top and stops.

6. Repeat the operation 4-5 until the siren sounds on the electric control box and the warning has reached the set packing height. At this time, the indenter presses the paper bag and stops. (If you do not need to set the packing height, you need to pack in advance. Down button for 2 seconds, at this time the machine starts, the indenter presses the paper bag and stops, continue to the next operation).

7. Open the upper and lower doors, and from the back of the machine, pass two ends of a wire or plastic rope through the indenter and the corresponding threading slot at the bottom from the front of the machine, and tie the exposed two ends of the machine (because Expansion of the bag, do not tighten the thread too much, leave a certain margin to prevent disconnection), wear all the threads and knot as described above.

8. Place a tray in front of the machine. Take out the bag-out chain at the rear of the machine and place it in the bag-out slot on the indenter.

9. Check whether there is any person or foreign body in the package position, and confirm the safety.

10. Press and hold the up button, the indenter rises to drive the bag out of the bag and turn it on the tray, and then transport the bag to the designated position. , Continue operation after the danger is eliminated), a work cycle ends.

12. After the work is completed, turn off the key switch and press the emergency stop switch to turn off the load switch.

Hydraulic Cardboard Baling Machine China

Development trend of hydraulic cardboard baling machine china:

(1) High speed, high efficiency and low energy consumption. Improve the working efficiency of hydraulic baler and reduce production costs.

(2) Electromechanical-hydraulic integration. Make full use of advanced technologies in machinery and electronics to promote the improvement of the entire hydraulic system.

(3) Automation and intelligence. The rapid development of microelectronics technology provides sufficient conditions for the automation and intelligence of hydraulic presses. Automation is not only reflected in processing, it should be able to achieve automatic diagnosis and adjustment of the system, with the function of fault pre-processing.

(4) Hydraulic components are integrated and standardized. The integrated hydraulic system reduces piping connections and effectively prevents leaks and contamination. Standardized components facilitate maintenance of the machine.