How to Prevent Moisture from Entering the Automatic Baler Equipment During Operation?

(1) Water corrodes the metal in the hydraulic system of the auto tie baler machine, shortens the service life of the components, and the particles of the corrosion fall into the system, causing wear.

(2) (2) Accelerate the deterioration of oil, especially in the presence of particles such as iron, copper, manganese, etc., and the oxygen in the water and the air rapidly oxidizes the oil to form a viscous polymer, commonly known as sludge. When the use temperature exceeds 65 degrees, the oxidation speed will increase. For every 10 degrees, the oxidation will increase exponentially.

(3) Lubricity is reduced.

Due to the influence of moisture, the content of water in the automatic baler oil is stipulated. The general automatic baler system must not exceed 0.5%, and the requirements for more precise equipment will be higher. We have to keep the hydraulic oil under atmospheric pressure when using the machine.

Auto Tie Baler Machine

In addition, in order to reduce the influence of moisture, the fuel tank of the fully automatic baler should be capped as much as possible. Especially for outdoor machines, due to changes in air temperature, the ingress of rainwater should be avoided, and the system should use a hydraulic closed circuit system to minimize the impact of moisture.

The maintenance of recycling baler machine often determines the service life of the machine and the efficiency of the machine. The automatic baler itself is actually classified as a high-precision machine. High, its structural parts must be strictly inspected before it can be mass-produced. The internal irregularity will cause problems and defects in the automatic baler often.

Secondly, it is a matter of moderation of its own use. Everything has a freight cost. The high intensity and overload of the operation make the service life of the automatic baler shorten. Moderate attention should be given.

China mobile waste sorting machine supplier believes that the daily maintenance of automatic balers is the basic work of equipment maintenance and must be institutionalized and standardized. Regarding the regular maintenance work of the fully automatic baler, work quota and material consumption quota shall be formulated and evaluated according to the quota. The regular maintenance work of the fully automatic baler shall be included in the assessment content of the worker contract responsibility system.

The regular inspection of the fully automatic baler is a planned preventive inspection. In addition to the human senses, the inspection method is also performed according to the regular inspection card. Regular inspection is also called regular inspection. Fully automatic baler equipment should also be thoroughly inspected and responded: inspection of oil cylinders, oil pumps, electrical appliances, and various sliding parts. The maintenance of the fully automatic baler should be carried out according to the maintenance procedures. Fully automatic packing machine maintenance regulations are requirements and regulations for the daily maintenance of equipment. Adherence to the implementation of full automatic packing machine maintenance regulations can extend the service life of the equipment and ensure a safe and comfortable working environment.

The Maintenance And Maintenance Work Of The Hydraulic Packer

 First, its maintenance work is introduced in detail. hydraulic cardboard baling machine china works to remove debris or dirt for maintenance from one week to 10 days.

Second, one month after the hydraulic baler works normally, the cleaning, maintenance and lubrication of the upper slide, middle knife and front ejector described in the previous paragraph will be performed once. The third is to perform all maintenance on the shaft (heart) and bearings every three months, except for the above two maintenances.

The hydraulic packer replenishes the oil in the gearbox of the reducer every two years. Also note that several parts cannot be refueled: rollers and reels, all belts, sliders and surrounding.

Cards may appear when the hydraulic packer is working properly. For example, how to handle horizontal waste paper hydraulic balers? Below, Belik teaches you how to deal with it. The horizontal waste paper packing tape is stuck in the center of the roller, or there is a foreign matter blocking the box. Loosen the countersunk head screws on the central connecting shaft, remove the connecting shaft, pick up the upper turbine, and remove the stuck object.

Hydraulic packers cannot form a belt without proper wear. Hydraulic packer equipment has been in use for a long time and has not been cleaned and maintained in a timely manner. As a result, swags are present in the machine, which makes the belt non-smooth and does not form. Using a belt, the horizontal waste paper baler can be completely cleaned and returned to normal.

Some hydraulic balers sometimes have problems, such as not actively feeding the belt. First check whether the potentiometer for belt length control is at the zero position. The potentiometer for belt length control is located at the left side of the front panel switch card. If it is at the zero position, it will not be performed.

China sorting machine MSW supplier believes that hydraulic balers have advantages and disadvantages in both vertical and horizontal styles.

The hydraulic packer has a horizontal packer and a vertical packer. The hydraulic packer is simple and complete, which can increase the total power of the packaging and save the labor cost of packaging. The hydraulic packer lead frame consists of four sets of wire equipment installed on the frame. The entire lead frame is suspended on the central axis of the press frame and moves horizontally relative to the press frame under the action of a hydraulic motor. The frame is a welded part with wheels at the bottom and moves horizontally along the main track as the hydraulic cylinder advances. Hydraulic balers are usually used to receive and manipulate compressed cardboard, waste film, waste paper, foam plastics, beverage cans and industrial decoration. With the advancement of technology, industrial development and the use of balers. Therefore, the baler has also been recognized by more and more people. It is used more and more widely.

Waste Recycling Equipment Factory

Hydraulic baler and horizontal waste paper hydraulic baler. As a result, this results in higher vertical packaging costs and lower power. The atmosphere of the hydraulic packer in the oil mixture or in the hydraulic cylinder is not completely exhausted. The hydraulic packer produces a cavitation phenomenon under the high pressure effect and generates a large noise. Whether it is a horizontal baler or a vertical baler, it has its own advantages and disadvantages, such as the low cost of a vertical baler, a small footprint, the high cost of a horizontal baler, and a large footprint.

The hydraulic packer is used to squeeze waste paper and similar products under normal conditions and is packed with special packaging tape to reduce volume, thereby reducing transportation volume, saving freight and increasing corporate profits. purpose. However, some operators and controllers are more casual, especially in the hot summer, especially when they work barefoot everywhere, but this is very dangerous, not only because the debris on the ground straps can stab feet, but more importantly if The floor is wet and easy to connect. Lead to very serious consequences.

Second, the wire connector is not fixed. In the production hall, the equipment is sometimes far from the power source, or the original wires are not long enough. At this point, the wires are connected, but the operator saves the connected wires directly to save time. Driving on the ground without following the direction of the wiring duct is very dangerous. The working conditions of waste paper balers are usually not very good, and all minor safety issues are easily overlooked, causing unnecessary losses.

Teach You How to Buy a Waste Paper Baler

Waste sorting system China supplier introduces you: Waste paper packing machine is a kind of packing machine that does not require manual feeding, and is completely packed by the machine itself. The price of automatic balers in the market only provides consumers with needs, but when choosing a baler, it should be noted that balers are divided into automatic balers and semi-automatic balers, so there are some things to consider when choosing the price of a baler. And choose automatic baler. Let me explain a few points about choosing a fully automatic baler.

1. High standard automatic packer is suitable for carton packing in hardware, food and other industries.

2. Low standard automatic packer has a low table, you need to get the package manually to pass the packaging equipment. The tabletop is high enough to be customized to the customer's conveyor line.

3, side standard automatic packing belt Because you do not need to worry about the body's dust, water droplets and corrosive liquid erosion and abrasion, this automatic packing machine can be used to pack cartons with liquid, seafood and dust.

4. Because it can be used alone and with the assembly line, this one is mainly used in post and telecommunications, chemical, home appliances and other industries.

5. From this perspective, customers can't see the surface price when choosing automatic balers and semi-automatic balers. It is bringing the product to the field application so that you can better select the good product and still have a look. The actual situation of the manufacturer.

Paper Baler Machine

The electromagnet of the waste paper baler does not work properly. The solenoid does not work. First check whether the solder joint is broken, and then check whether the coil is burned out. If there are no abnormalities, check whether the electromagnet is dislocated or blocked by the stolen material to prevent the bullet from moving freely. The temperature of the horizontal waste paper packaging machine and heater can be suspended by the internal temperature scheduler. Generally, the good size of the method is "4". The entire consuming process is not heating, doping or other processes, but direct cold forming. Forming together also ensures the same raw material. For example, cast iron chips are used instead of cast iron after forming. For castings using special materials, recycling is even more important.

The advantages of a paper baler machine in packaging waste paper boxes are basically manual packaging with a rope, but a waste paper baler can quickly improve work efficiency. The protection of waste paper balers is widely used in the industrial production industry. . With the continuous development of society, the requirements for packaging are constantly increasing, the technology is constantly improving, and it is becoming more and more intelligent. Therefore, the improvement of industrial efficiency is also obvious, so the waste paper packing machine manufacturer has brought a lot of changes in industrial progress.

Waste Paper Baler Can Handle Many Types Of Books And Is Widely Used

Waste sorting equipment manufacturer share with you:

Paper baler machine has good toughness, good stability, beautiful appearance, convenient operation and maintenance, safety and energy saving, and low investment cost for equipment and infrastructure engineering. It is widely used in various waste paper mills, used materials recycling companies and other unit enterprises. It is suitable for packaging and recycling used waste paper and plastic straws.

It is a good equipment to improve labor efficiency, reduce labor intensity, save manpower, and reduce transportation costs. Waste paper baler is an electromechanical integrated product, which is mainly composed of mechanical system, control system, feeding system and power system.

The waste paper baler can be classified according to the following standards:

1. Manual baler: Generally, manual operation is required to complete the entire process. In general: electric heating, iron buckle clamping.

2. Semi-automatic packing machine: After the packing machine is manually inserted into the packing tape, the machine will automatically complete the process of packing, gluing, cutting and removing the packing tape, because each product requires manual operation.

 Waste Paper Baler

3. Fully automatic baler: There is no need to manually insert the belt, and its triggering method is divided into a little movement, manual, continuous playing, ball switch, foot switch, and the packing can be automatically completed by simply pressing the switch, which is convenient and quick.

What kind of books can waste paper baler handle? The following introduces you:

1. Used books: second-hand books, no matter how used.

2. White paper: pure white, clean, no film.

3. Binding paper edge: Cut the paper edge when printing books, with a small amount of copper plate and plastic head.

4. Yellow board: The discarded boxes are mainly yellow.

5. Gray card: gray from outside to inside, no film, can bring color.

6. New newspapers: too many unused newspapers.

7. Old newspapers: used newspapers obtained from waste paper collection stations.

Newsprint: same as newspaper paper, but without color words.

Newsprint: same as newspaper paper, but without color words.

Paper cup: and the remaining paper in the production of paper cup.

Tetra pak packaging: such as milk cartons.

11. Pages: the paper is messy, no glue, no film, you can have text.

What Are The Direct Factors That Affect The Production Efficiency Of The Waste Paper Baler?

Recycling sorting equipment supplier Share with you:

The quality of the hydraulic oil used in the paper baler machine directly determines whether the oil cylinder can play a great role, and also directly affects the failure rate and service life of the oil cylinder. In order to ensure the effective production of the baler, No. 46 anti-wear hydraulic oil is required. The direct influence factors of the production efficiency of the waste paper baler are: the model and specifications of the baler, the output of different models is different, and the different specifications directly determine the production efficiency of the baler. The production efficiency of the conventional waste paper baler is higher than that of the baler with an outlet.

Paper Baler Machine

Waste paper baling machine is packed by tensioning, heat capacity, tape cutting and gluing. Regardless of the size of the package, the carton waste paper packing machine can pack without adjusting the machine. The waste paper baler is a mechanical structure, and some parts are imported cotton baler parts. The back cutting edge is stable and reliable, easy to adjust, and the waste paper baler is reasonably priced. When the ultrasonic generator is running, the ultrasonic energy is converted by the ultrasonic wave. Flash point of automatic shearing machine:

1. The cutting machine is complete, beautiful, smooth and smooth, and the edges are not scattered, and the cutting effect is good;

2.Shearing machine adopts PLC console, automatic feeding, computer counting, high precision, fast speed, fast adjustment, simple adjustment, fast, high efficiency, can cut multiple times at once

3, mostly used for gift belts, nylon belts. In the field of shearing machine production, such as shearing belts, such as scissors, inclined blades, dovetails, etc .; This product is widely used in packaging, metal processing, sheet cutting and other industries. The new fully automatic shearing machine (ultrasonic cutting machine) is a combination of ultrasonic welding technology and traditional shearing machine. Its good shearing effect is favored by friends around the world.

There are different reasons why air enters the waste paper baler system. During use and maintenance, please note the following:

1. An exhaust valve must be installed on the top of the waste paper baler to exhaust air from the cylinder and the system. The change in oil temperature and load adjusted by the straw baler is greater than the throttle valve, and a flow control valve is used. The parallel hydraulic cylinder synchronization circuit has a simple structure and low cost, and is widely used.

2. Try to prevent any pressure in the waste paper packer system from falling below atmospheric pressure. At the same time, a particularly good sealing device is used. Replace the fault in time. Tighten the fittings and the surface of each fitting, and clean the suction pipe promptly. Pack the oil filter at the tank inlet.

3. Always check the liquid level of the waste paper baler. The height of the waste paper baler should be maintained on the mimeograph scale. On low surfaces, the suction nozzle and the same pipe opening should also be below the liquid level. Delimited by partitions.

The crushing system display of garden waste and building material waste that our company represents, welcome to browse.

Crushing system service for garden waste and building material waste, which is represented by Dezhou Qunfeng Machinery Manufacturing Co., Ltd.

The main services include waste separation and treatment, landfills for domestic waste, treatment of large-scale urban waste, treatment before incineration of biomass power plants, garbage

A series of treatment items such as the treatment before the incineration of power plants, the treatment of biomass materials for garden trees, the disposal of house attachments, and waste tires.

The company has a series of products such as waste recycling equipment factory, garbage sorting system, biogas power plant, etc. The products can complete the waste disposal in time and quickly.

Our company also has a professional service team with many years of maintenance experience and skilled after-sales service personnel. Good after-sales service brings more working hours and better economic benefits to customers.

We welcome environmental sanitation, environmental protection, urban construction, residential construction, garbage power generation, biomass power generation, gardening, forestry and post-disaster emergency treatment departments to contact us for further information.

Waste Collection System

The collection of solid waste is a fairly complex issue. Garbage sorting equipment supplier believes that solid waste can be divided into two types according to the collection method. One type is waste that can be recycled at the waste collection point, such as old newspapers, non-ferrous metals, waste steel, rubber, plastic, etc. Collected by the waste material recycling system belonging to the commercial sector, the other type, such as factory waste residue, dust, daily life garbage and so on. Because this kind of waste has relatively low utilization value, it is particularly easy to be ignored and discarded arbitrarily, which causes greater harm to the environment. There is a large-scale application of solid waste treatment or comprehensive utilization, and the amount is too small. Decentralized treatment or utilization is often not economically feasible and technically difficult. Therefore, it is necessary to collect a small amount of waste scattered in various factories or sources. Transport to the appropriate disposal site.

Municipal solid waste has many types, complex components, and different properties, so its classification methods are also many. According to its physical properties, it is divided into organic waste and inorganic waste; according to its form, it is divided into solid waste and slurry waste; Its hazardous status is divided into toxic and hazardous waste. Waste and general waste; by industry, there are mining waste, metallurgical waste, chemical waste, civil waste, etc .; according to the requirements of different treatment methods, it can be divided into combustible waste and non-combustible waste, compostable waste and non-compostable waste, and Resource-based waste and difficult-to-resource waste, etc. According to the source, the mouth is divided into industrial solid waste, agricultural solid waste, mining solid waste, urban domestic waste, radioactive solid waste, and many countries in Europe and the United States are classified according to this principle. Japan divides solid waste into industrial solids.

Both physical waste and general solid waste. Starting from the management of solid waste in China, it is usually divided into three categories: industrial solid waste, hazardous solid waste and general solid waste (referring to urban solid waste and agricultural solid waste)

Garbage Sorting System Factory

The collection of domestic garbage can be divided into three stages.

The first stage is the process in which garbage is generated from households to trash cans. There are many ways to generate and collect garbage at this stage. Whether it is classified collection or mixed collection, fixed-point collection, regular collection, or on-site collection. The collection of domestic garbage in China in 2001 was still based on fixed points and regular timing. Therefore, residents from the households to the bins are responsible for the garbage;

The second stage is the process of garbage collection from garbage collection trucks to various garbage collection points. This process is related to the collection method of garbage collection trucks. The garbage collection trucks use the container exchange type to transport empty garbage bins and put them in the garbage. At the collection point, the actual trash can is transported back to the treatment and disposal site or the transfer station, and after it is discharged, it is sent to the next collection point. The fixed container collection system is still used (the garbage truck loads the garbage in the garbage bin at the collection point into the garbage collection year, and the garbage bin is still put back in place).

The third stage of garbage collection and transportation is to transport the garbage collected in each collection area to a transfer station or various types of garbage processing and disposal sites. If a city has a garbage sorting system factory, determine the number of garbage collection sites to which each collection area should be sent and the amount of waste to be transported. Disposal fees> the most economical.