Precautions For The Use Of Hydraulic Automatic Baler

1. The waste paper baler must be fixed when installing. Due to the fast running speed of the machine, the uneven ground may cause the machine to vibrate and cause safety hazards to the operator. Therefore, it is necessary to keep the ground level and install the machine according to the instructions to keep the machine stable. During the operation of the machine, it is forbidden to touch the moving parts of the machine by hand.

2. Safety of mechanical power supply: The power supply of the machine should be grounded to avoid electric shock caused by improper operation. The power supply should have an automatic shutdown device so that the machine can automatically stop when there is a problem with the power supply to avoid electric shock.

3. Cleaning of the machine: As the waste paper baler is often used for packaging cartons, etc., debris will be blocked over time. Sometimes it will cause the machine to run poorly, cause damage to the machine, and reduce the service life of the machine. The machine should be cleaned regularly, and lubricant should be regularly applied to the parts in need.

4. The operator of the machine should do a good job of protective work, such as wearing gloves, etc., and it is forbidden to put head and hands into the machine. Non-machine operators should try to keep a certain distance from the machine to prevent damage caused by material splashing.

5. The machine should be checked before use and run for a period of time: turn off the switch according to the steps after use.

6. Do not disassemble the protective cover of the machine at will: it is forbidden to disassemble the protective cover while the machine is running. Non-operators or technicians are not allowed to disassemble the protective cover of the waste paper baler at will.

The hydraulic automatic straw baler supplier reminds you that these two environments may cause damage to the hydraulic baler.

1. Severely humid environment. There are many factories producing aquatic products, the air humidity is relatively high, and even the water on the ground is deep. At this time, it is obviously inappropriate to use an ordinary semi-automatic baler. At this time, the strap will fall to the ground and get water, and it will be very uneven next time you work.

2. Corrosive environment. This environment is mainly manifested by a strong acid or strong base. Since the outer casing of carbon steel is not as corrosion-resistant as the stainless steel the casing is easily corroded in such an environment.